Verify your Site2-L1 leaf switch.
Login to your Site2-L1 switch using the copy command below and paste into your VSCode Terminal. When prompted, the password is cisco.123 .
If prompted to accept the RSA key fingerprint like below, type or copy yes then input the password above.
The authenticity of host '10.3.3.18 (10.3.3.18)' can't be established.
RSA key fingerprint is SHA256:xneE+2XnZozaXwC/FgeYMRKJ4UhZV4iZD6QCD1u7gi8.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '10.3.3.18' (RSA) to the list of known hosts.
User Access Verification
Password:
show run interface ethernet 1/1-6 ; show run interface loopback0-1
Output:
!Command: show running-config interface Ethernet1/1-6
!Running configuration last done at: Thu May 29 22:01:45 2025
!Time: Thu May 29 22:03:33 2025
version 10.5(3) Bios:version
interface Ethernet1/1
description connected-to-site2-s1-Ethernet1/1
no switchport
mtu 9216
ip address 10.2.0.1/31
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
no shutdown
interface Ethernet1/2
interface Ethernet1/3
interface Ethernet1/4
interface Ethernet1/5
interface Ethernet1/6
!Command: show running-config interface loopback0-1
!Running configuration last done at: Thu May 29 22:01:45 2025
!Time: Thu May 29 22:03:33 2025
version 10.5(3) Bios:version
interface loopback0
description Routing loopback interface
ip address 10.22.0.1/32
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
interface loopback1
description VTEP loopback interface
ip address 10.222.0.1/32
ip router ospf UNDERLAY area 0.0.0.0
ip pim sparse-mode
show run ospf
Output:
!Command: show running-config ospf
!Running configuration last done at: Thu May 29 22:01:45 2025
!Time: Thu May 29 22:04:06 2025
version 10.5(3) Bios:version
feature ospf
router ospf UNDERLAY
router-id 10.22.0.1
interface loopback0
ip router ospf UNDERLAY area 0.0.0.0
interface loopback1
ip router ospf UNDERLAY area 0.0.0.0
interface Ethernet1/1
ip ospf network point-to-point
ip router ospf UNDERLAY area 0.0.0.0
show ip ospf neighbors
Output:
OSPF Process ID UNDERLAY VRF default
Total number of neighbors: 1
Neighbor ID Pri State Up Time Address Interface
10.22.0.4 1 FULL/ - 00:26:49 10.2.0.0 Eth1/1
show run pim
Output:
!Command: show running-config pim
!Running configuration last done at: Thu May 29 22:01:45 2025
!Time: Thu May 29 22:04:24 2025
version 10.5(3) Bios:version
feature pim
ip pim rp-address 10.252.252.1 group-list 239.1.1.0/25
ip pim ssm range 232.0.0.0/8
interface loopback0
ip pim sparse-mode
interface loopback1
ip pim sparse-mode
interface Ethernet1/1
ip pim sparse-mode
show ip pim neighbor
Output:
PIM Neighbor Status for VRF "default"
Neighbor Interface Uptime Expires DR Bidir- BFD ECMP Redirect
Priority Capable State Capable
10.2.0.0 Ethernet1/1 00:27:27 00:01:44 1 yes n/a no
show run bgp
Output:
!Command: show running-config bgp
!Running configuration last done at: Thu May 29 22:01:45 2025
!Time: Thu May 29 22:04:24 2025
version 10.5(3) Bios:version
feature bgp
router bgp 65222
router-id 10.22.0.1
neighbor 10.22.0.4
remote-as 65222
update-source loopback0
address-family l2vpn evpn
send-community
send-community extended
vrf RedVRF
address-family ipv4 unicast
advertise l2vpn evpn
redistribute direct route-map fabric-rmap-redist-subnet
maximum-paths ibgp 2
address-family ipv6 unicast
advertise l2vpn evpn
redistribute direct route-map fabric-rmap-redist-subnet
maximum-paths ibgp 2
evpn
vni 49000 l2
rd auto
route-target import auto
route-target export auto
vrf context RedVRF
rd auto
address-family ipv4 unicast
route-target both auto
route-target both auto evpn
address-family ipv6 unicast
route-target both auto
route-target both auto evpn
show bgp l2vpn evpn summary
Output:
BGP summary information for VRF default, address family L2VPN EVPN
BGP router identifier 10.22.0.1, local AS number 65222
BGP table version is 3, L2VPN EVPN config peers 1, capable peers 1
0 network entries and 0 paths using 0 bytes of memory
BGP attribute entries [0/0], BGP AS path entries [0/0]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.22.0.4 4 65222 33 33 3 0 0 00:27:58 0
show run interface nve1
Output:
!Command: show running-config interface nve1
!Running configuration last done at: Thu May 29 22:01:45 2025
!Time: Thu May 29 22:04:24 2025
version 10.5(3) Bios:version
interface nve1
no shutdown
host-reachability protocol bgp
source-interface loopback1
member vni 49000
mcast-group 239.1.1.1
member vni 59000 associate-vrf
show nve interface nve 1 detail
Output:
Interface: nve1, State: Up, encapsulation: VXLAN
VPC Capability: VPC-VIP-Only [not-notified]
Local Router MAC: 5200.0038.1b08
Host Learning Mode: Control-Plane
Source-Interface: loopback1 (primary: 10.222.0.1, secondary: 0.0.0.0)
Source Interface State: Up
Virtual RMAC Advertisement: No
NVE Flags:
Interface Handle: 0x49000001
Source Interface hold-down-time: 180
Source Interface hold-up-time: 30
Remaining hold-down time: 0 seconds
Virtual Router MAC: N/A
Interface state: nve-intf-add-complete
show nve vni
Output:
Codes: CP - Control Plane DP - Data Plane
UC - Unconfigured SA - Suppress ARP
SU - Suppress Unknown Unicast
Xconn - Crossconnect
MS-IR - Multisite Ingress Replication
Interface VNI Multicast-group State Mode Type [BD/VRF] Flags
--------- -------- ----------------- ----- ---- ------------------ -----
nve1 49000 239.1.1.1 Up CP L2 [2999]
nve1 59000 n/a Up CP L3 [RedVRF]
show run interface vlan2299, vlan2999
Output:
!Command: show running-config interface Vlan2299, Vlan2999
!Running configuration last done at: Thu May 29 22:01:45 2025
!Time: Thu May 29 22:05:28 2025
version 10.5(3) Bios:version
interface Vlan2299
description RedVRF
no shutdown
mtu 9216
vrf member RedVRF
no ip redirects
ip forward
ipv6 address use-link-local-only
no ipv6 redirects
interface Vlan2999
description RedNet1
no shutdown
mtu 9216
vrf member RedVRF
ip address 192.168.21.1/24
fabric forwarding mode anycast-gateway
exit